Epson WF-3640 Ink Cartridges
The Epson Workforce WF-3640 features printing, copying, scanning, and faxing for everyday use in the home and micro offices. The Epson 3640 ink cartridges required are Epson 252 ink or high yield Epson 252XL ink and comes in Epson WF-3640 black ink, cyan, magenta, and yellow. Each of our high yield Epson WF-3640 ink cartridges yields 1100 pages at a stunning resolution of 4800 x 2400 dpi with this printer model's print speeds reaching up to 19 ppm.
Among our Epson 3640 ink products, you'll find affordable remanufactured single Epson WF-3640 ink cartridges as well as combo packs, both priced to fit any budget. We also let you create your own custom combo packs with our Build a Combo feature so you can get exactly the Epson WF-3640 ink cartridges you need.
To find help with your printer or Epson Workforce WF-3640 ink, click on this Epson Workforce 3640 Guides and FAQs to be directed to easy-to-read guides written by our printer professionals. You'll find helpful guides like installing Epson 3640 ink or troubleshooting issues you may experience during your Epson WF-3640 ink replacement.
Epson WF-3640 Ink Cartridges - Combo Pack
Epson WF-3640 Ink Cartridges - Single Pack
How to Replace Epson Workforce 3640 Ink Cartridge
- Make sure your printer is powered on.
- If an ink cartridge is empty, you'll see a message on the LCD screen on the printer. Remember which cartridge(s) need to be replace, then select "PROCEED" and follow the instructions on the screen to move forward.
- If you're replacing ink cartridges before they are empty, start by pressing the home button, select "Setup Maintenance", then "Ink Cartridge Replacement" to move forward.
- Open the scanner unit but lifting it upwards.
- Open the cartridge cover by pulling it up and towards you revealing the ink cartridges.
- To release the cartridge, squeeze the tab on the ink cartridge and left it up and out. Discard or recycle.
- Shake the replacement ink cartridge about 4-5 times before removing it from its packaging.
- Remove ONLY the yellow tape.
- Insert the replacement cartridge and push down until it you hear and feel it click into place.
- Close the cartridge cover.
- On the LCD screen, select "Check" to make sure your cartridges are installed correctly.
- Close the scanner unit.
FAQ - Frequently Asked Questions
- Why does my Epson printer print blank pages? Why does my Epson printer not print properly?
Check the following:
- Verify in your printing program and software that you have chosen the correct paper size setting.
- Check to see if any of the nozzles are clogged by running a print head nozzle check. Clean the printer head after if needed.
- Make sure you have the correct printer selected as your printer destination/ printing program
- Check your printer cartridges to see that the yellow tape has been removed.
For Windows® Computer
Here are 5 routes on troubleshooting this issue. Depending on your Windows program try the applicable option in Step 1 followed by 2, 3, & 4.
- Step 1 (options):
- Windows 10: Right-click on Windows Start icon & select Control Panel > Hardware and Sound > Devices and Printers. Right-click the product name & select Printer Preferences.
- Windows 8.x: Go to the Apps screen & select Control Panel > Hardware and Sound > Devices and Printers. Right-click your printer & select Printing Preferences.
- Windows 7: Click on Windows Start icon & select Devices and Printers. Right-click your printer & select Printing Preferences.
- Windows Vista: Click on Windows Start icon & select Control Panel. Select Printer which is found under Hardware and Sound or Printers. Right-click your printer & select Printing Preferences.
- Windows XP: Click Start & select Control Panel or point to Settings & select Control Panel. Select Printers and Other Hardware (if available). Then Printers and Faxes. Right-click your printer & select Printing Preferences.
- Step 2: Select the Maintenance tab and click the Extended Settings button.
- Step 3: Located in the Settings area, select the Skip Blank Page setting or checkbox.
- Step 4: Select OK to save your settings.
- Step 1 (options):
For macOs Computer
- Open the menu.
- Select System Preferences
- Select one of the following: Print & Scan, Print & Fax, or Printers & Scanners.
- Select your printer, then Options & Supplies.
- Select Driver or Options.
- If you have navigated through properly you should see this on your screen:
- Set the Skip Blank Page to On.
- Select OK.
- How do I reset my Epson Workforce 3640?
Are you experiencing issues with your printer settings? If so, you have the option to reset your printer to its default factory settings. You have the choice of choosing which particular settings to reset or reset them all.
- Press on the home button, if needed.
- Using the left or right arrow button, choose the Setup option and press the OK button.
- Using the left or right arrow button, choose the Restore Default Settings option and press the OK button.
- Using the left or right arrow button, choose one of the following options and press the OK button:
- Network Settings: Resets all network settings.
- All except Network Settings: Resets all control panel settings, except for network settings.
- All Settings: Resets all control panel settings.
- You should see a confirmation screen.
- Press on the OK button to reset your selected settings.
- Why is my Epson printer not printing when the ink is full?
It's possible that your ink cartridge is not set in its slot properly. Troubleshoot by doing the following steps:
- Turn on your printer
- Check your LCD screen for a message stating that your cartridges are expended.
- Remember which ink cartridge needs to be replaced and press the OK button followed by the option Replace now.
- Lift the scanner portion of your printer
- Squeeze the tab on the cartridge releasing it from its slot. Lift to remove the empty ink cartridge.
- Check to see if the the yellow tape located on the side of the cartridge is removed. If is still there, remove it.
- Insert the replacement ink cartridge into the empty slot the direction in which the cartridge was removed. Push down until you hear and feel the cartridge click into place.
- Close the scanner portion of your printer and select the Start button. It will take approximately 90 seconds for your print head to adjust and move to its home position. Once you see a confirmation message on the LCD screen, you're all set!
For more troubleshooting tips, visit Epson USA Workforce WF-3640 FAQ and Guide Official Page.Here you will find useful details on how to connect Epson Workforce WF-3640 printer to computer, two sided printing, scan to email, ink cartridge not recognized, and much more!